Substrate coating of Moisture proof is realized high speed widely
Coating valve CV-10
・We realize uniform coating dispensing.
・There is not scattering, edge and edge face neatly
Dispensing.
・By low flow quantity design, film dispensing is possible.
・It carries exclusive nozzle and applies extensive film formation
We realize this.
・It is stroked valve by micrometer calipers Equipped
Number management is possible of this.
Moisture proof coating dispensing to Substrate
| Model | CV-10-2P-1N | CV-10-2P-1N-N6 |
|---|
| Drive system | Air operation rate type |
|---|
| Available viscosity range | ～100mPa・s |
|---|
| Operation air pressure | 0.35～0.5MPa |
|---|
| Maximum Fluid feed pressure | 0.5MPa |
|---|
| Connection diameter | Liquid entrance | Rc1/8
(Fluid feed successor places an order separately) | φ 6 X φ 4 Fluid feed coupling |
|---|
| Liquid discharge opening | Exclusive nozzle |
|---|
| Air operation port | One-touch coupling (with speed controller) for external diameter φ 4 tube |
|---|
| Operating temperature limits | 5～60 degrees Celsius |
|---|
| Weight | 240 g | 267 g |
|---|
| Wetted part material | Stainless steel, Polyacetal, fluoric resin, ceramic
|
|---|
Capacity measuring type 
Piston control valve P 